BPSYD - FUTURA BOND 581B(FB 581B)

  • MSDS: BPSYD
  • Manufacturer: FUTURA COMPANIES LTD
  • Product Name: FUTURA BOND 581B(FB 581B)
  • National Stock Number: 8040-00F025861
Product Identification

Product ID:FUTURA BOND 581B(FB 581B)
MSDS Date:12/15/1987
FSC:8040
NIIN:00F025861
MSDS Number: BPSYD

Responsible Party
FUTURA COMPANIES LTD
4122 E PONCE DE LEON AVE
CLARKSTOWN, GA 30021
US

Emergency Phone: 404-296-8288

Info Phone: 404-296-8288

Preparer: DONALD GOLDSTEIN

Cage: FUTUR

Contractor
FUTURA COMPANIES LTD
CLARKSTOWN, GA 30021 US

Telephone: 404-296-8288

Cage: FUTUR

Ingredients

NON-HAZARDOUS FOR INGREDIENTS

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: INJURY FOLLOWING SENSITIZATION OR OTHER
ALLERGIC RESPONSES.
Medical Cond Aggravated by Exposure:AVOID CONTACT IF SENSISTIZED.

First Aid

First Aid:SKIN: WASH W/SOAP & WATER. INHALATION: REMOVE TO FESH AIR.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:CO2, FOAM & DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CORROSIVE LIQUID.

Accidental Release

Spill Release Procedures:BROADCAST VERMICULITE OR OTHER SWEEPING
COMPOUND.

Handling

Handling and Storage Precautions:AVOID INHALATION OF VAPOR & CONTACT
W/SKIN

Exposure Controls

Respiratory Protection:POSITIVE VENTILATION.
Ventilation:MECHANICAL: GOOD GENERAL IS . USE GOOD VENTILATION IF
HEATED OR SPRAYED.
Protective Gloves:RUBBER OR POLYETHYLENE
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:CLEAN LONG SLEEVE & LONG LEG CLOTHING.
Work Hygienic Practices:PRACTICE GOOD HOUSEKEEPING.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:200F
Vapor Density:>1
Spec Gravity:1.44
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MODERATE
Appearance and Odor:VISCOUS BLACK PASTE, AMMONIA ODOR
Percent Volatiles by Volume:0.003%

Stability

Stability Indicator/Materials to Avoid:YES
EPOXY RESINS
Stability Condition to Avoid:EPOXY RESINS IN UNCONTROLLED CONDITION.
Conditions to Avoid Polymerization:EPOXY RESINS IN UNCONTROLLED
CONDITIONS.

Disposal

Waste Disposal Methods:COLLECT IN WASTE METAL DRUMS & SEAL FOR REMOVAL
TO ISOLATED DUMP OR BURN IN ADEQUATE INCINERATOR. OBSERVE FEDERAL,
STATE & LOCAL CODES. CORROSIVE LIQUID.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.